Chaitanya Machine - Chipmax-38 & Chipmax-45

Technical Specification :
			Unit	CHIPMAX - 38	CHIPMAX - 45
Capacity	Centre height over flat bedways		MM	375	450
	Swing ove BED		MM	750	900
	Swing in Gap		MM	1150	1300
	Swing over Saddle		MM	575	725
	Swing over cross Slide		MM	500	650
	Width of gap in front of Face Plate		MM	300
	Width of Bed		MM	500	560
Main Spindle	Type			A2-8
	Spindle bore diameter / taper		MM	104/MT-6
	Taper in centre adaptor			MT-6
Spindle Speeds	Number / range (In G.P.)		Nos / RPM	12 / 2 0 - 600
Carriage	Cross Slide travel		MM	500	600
	Compound Slide travel		MM	250
	Maximum section of tool		MM	32x32
Lead Screw	Diameter / Pitch		MM / TPI	50.8 / 2 TPI
Feed Range	Longitudnal (50 Nos)		MM / Rev	0.078 to 2.34
	Cross (50 Nos)		MM / Rev	0.016 to 0.470
Threads	MM (19 Nos)		Range	1.0 to 30
	Inch (42 Nos)		Range	1.0 to 30
	Module (19 Nos)		Range	1.0 to 30
	D.P. (48 Nos)		Range	2 to 60
Tail Stock	Diameter of Sleeve/bore taper		MM	100/MT-6
	Sleeve Travel		MM	250
Electrical	Supply (AC)	VOLT A.C , Phase , Frequency		415 V, 3 Ph, 50 Hz,
	Main Motor :	Upto 3500 ABC	KW / HP	5.5/7.5
		Over 4750 ABC	KW / HP	7.5 / 10.0
		Speed	Rev / Min	1440
	Other Motors :	Rapid Trav Motor for Saddle	KW	0.375
		Coolant Motor	KW	0.18