Technical Data

Capacity :

 SG-1 SG-2

Threads :

 SG-1 SG-2
Centre height over flat bedways 205 mm 205 mm

Metric

16 nos/0.5 to 8.00mm
Admit Between Centres 775 mm 1225 mm

Inch

47 nos/1.75 to 52 TPI
Swing ove bed 400 mm 400 mm Feeds :
Swing over cross slide 250 mm 250 mm No. 50 50
Swing in gap 600 mm 600 mm Range
Width of gap in front of face plate 150 mm 150 mm Longitudinal

0.039 to 1.15mm/rev.
Bed width 255mm 255 mm Cross

0.006 to 0.021 mm/rev.
Bed length

5'

 6 1/2' Tail Stock :

Main Spindle :

 Sleeve Dia 38.1mm 38.1mm
Spindle bore 40 mm 40 mm Sleeve travel 125 mm 125 mm
Taper bore in spindle MT 5 MT 5 Taper bore in sleeve MT-3 MT-3
Norse Dia/Thread

62mm / 8 TPI

Electricals :

Speed :

 Power Supply

415V.3 Phase 50 Hz AC
No/Range
8/50 to 1200 RPM
(In Geometric Prog)
Main Motor

KW/H.P. 1.5/2.0

Carriage :

 Coolant Motor

KW/H.P.O. 11/0.15
Cross Slide travel 275 mm 275 mm
Compound slide travel 120 mm 120 mm Miscellaneous Dimensions :
Tool shank capacity 20 mm 20 mm Net Weight(approx) 750 kg. 850 kg.

Lead Screw :

 Gross Weight(approx) 900 kg. 1050 kg
Dia 25.4 mm 25.4 mm Floor Space 1775x750 mm 2225x750 mm
Pitch 4 TPI 4 TPI Wooden Case Dim.[mm] L 2000 L 2400
[BxH] [mm]

[ 925 x 1400 ]
Geometrical and Practical accuracies TESTED as per INDIAN STANDARD INSTITUTE : 1878.1971

 

Standard Accessaries :
  • Hardened Bed 
  • Face Plate
  • Carrier Plate 
  • Chuck back plate
  • Centre Adopter
  • Four position Tool Post
  • Foot Brakes
  • Chip Tray
  • Instruction manual
  • Steady Rest
  • Follow Rest
  • Norton Gear Box
  • Tool Post Spanner
  • Dead Centres MT-3 (2 Nos)
  • Thread  dial  indicator
  • 2 HP Electric motor with electrical controls.

 

Optional Accessories :
  • Coolant pump (electrical) with Tank fittings and splash guard
  • Taper turning Attachment  
  • 3 jaw true  chuck     6"   or     8"
  • 4 jaw dog chuck    8"   or     10"   or    12"
  • Rear Tool Post
  • Machine Lamp  
  • Extra Chuck Plate
  • Extra Face Plate
  • Revolving Centre
Note :Due to technological developments, the illustrations and specifications are not binding in detail and are subject to modifications and improvements  without notice.

BACK